How to Build a Robot

Robots as we all know are considered as friendly creature created by human beings as we are created by God. They are created for human being to simplify life even more basically for our daily chores with the specified sequence and even by military for the purpose of doing things which has the danger to life of human beings and thus they are developed over years to substitute human beings in all the fields.

Many of us are not that qualified to make a robot by ourselves and that why we all are anxious to know how to make a robot and even depends upon the task we want to create it for. We all have the tendencies of exploring whatever new comes in the field of science and hence a basic prototype robot can be created knowing few basic high end programming stuffs.

Robots are almost 30% programming and hence if we target one specific purpose and program it well enough then it serves our purpose and the program mostly used for this is Unix and for beginner’s Lego Mindstorms series is the best and how complicated your robot might turn up to be depends upon your technical acumen.

While learning how to make a robot we should always keep in mind that fewer the moving parts be of the robot better it is for the beginner’s as for startup we might just want it to move from here and there or hold something and sort of stuff. We should link if-then statement well and it should be taken care of that battery is never less then 50% and if so happens it should be re charged.

Thus we now understand that knowing how to make robot can never be known as there is no limit to what can be achieved with the knowledge of science and development of robots can never end.

How to Build a Rocket

Rockets – They are one of the most enjoyable pyrotechnic devices. Small lightweight rockets can be made using Black powder, which is used popularly as rocket propellant and is easy to mix. We have explained the basic steps that can follow to make a simple rocket.

First make the black powder mix. Use Potassium Nitrate, Air Float Charcoal,80 Mesh Charcoal, Sulfur in the ratio of 16:6:3:4. This is a optimum mix ratio, grind all the mix into a container and make a fine free flowing powder. Pass it though a mesh preferably 20 Mesh steel mesh.

Take a 4 Oz Engine tube for making the Body of the rocket. Now ram the fine grained black powder mix into the tube up to 80% and a little air room. You can use a ‘ram through funnel’, which will make our task easy, the rammed materials inside the body of the rocket should be hard.

Now fill in clay after making it a little moist and fill it in the space where the room for air has been left. Now punch a thin hole in the clay using a thin object, say needle. This is for the fuse. A ready made fuse can be obtained from a firecracker or by coating a cotton string with the same black powder material.

Attach the fuse to the under part of the rocket body through the clay, also make a conical head of paper materials.

Now tape a long stick to the rocket for stability. The rocket is ready now, bury the stick in the sand upright and light the fuse, watch it skyrocket upwards.